Micro G Tabletop Exhibit Displays
The Micro Geometrix Tabletop Exhibit Displays are based on larger, accordion style pop up displays, but are downsized to fit on your display tables.
There are five sizes of the Micro G Tabletop Exhibit Displays (measured by counting the squares or quads). All 5 sizes are designed to fit on a 6ft display table. The available frame sizes of the kits are listed below.
Frame Sizes for Micro G Tabletop Exhibit Displays:
1x3 - 3 quads - 16.62"W x 46.75"H x 9.62"D
2x2 - 4 quads - 31.37" W x 32.12" H x 9.62" D
2x3 - 6 quads - 31.37" W x 46.75" H x 9.62" D
2x3 - 6 quads - Horizontal - 31.37" W x 46.75" H x 9.62" D
3x3 - 9 quads - 46" W x 46.75" H x 9.62" D
4x3 - 12 quads - 60.75" W x 46.75" H x 9.62" D
There are 11 graphic skin choices for the Micro Geometrix tabletop exhibit displays. These graphic skins attach via buttons, so they can literally be swapped out in seconds.
Some of the skin choices are easy to understand - they are different sizes, designed to cover one quad, two quads, three quads, or four quads.
Some skins like A, B, and C seem to be the same size, but they are actually slightly different sizes, because they are designed to connect differently.
Graphic Skin Choice Details
1x1 - 1 quad - Skin A
1x1 - 1 quad - Skin B
1x1 - 1 quad - Skin C
1x2 - 2 quads - Skin D
1x2 - 2 quads - Skin E
2x2 - 4 quads - Skin F
2x2 - 4 quads - Skin G
2x3 - 6 quads - Skin H
2x2 - 4 quads - Skin I
1x3 - 3 quads - Skin J
1x3 - 3 quads - Skin K
As shown above, graphic skins on the Micro Geometrix tabletop exhibit displays connect at the four corners of the graphic, and can be connected to the front or the back of the frame .
In practice, this means a skin could be connected all in front or all in back (skin A, for example). Or the skin could be connected in front on top of the skin and in back on the bottom of the skin (skin B, for example). Or 2 sides could be connected in front, and 2 sides in back (skin C, for example).
Skins can be selected to give very interesting 3D affects, but it is important to always attach a specific skin (A, for example) the same way, because the skins need to be slightly longer or shorter, to be used in different frame connection plans.
Key Features of the Micro Geometrix Tabletop Exhibit Displays
- Easiest and fastest setup for tabletop exhibit displays
- Very light weight - varies with frame size, about 5 lbs
- The graphic banners can be swapped in seconds
- The graphic banners are machine washable if soiled
- A soft carry case is included with each full table top exhibit displays kit
- A one year hardware warranty applies to each table top exhibit displays frame
The accordion frames are light weight, and the graphics are dye sub prints on tension fabric. The many different frame sizes and shapes of the Micro G Tabletop Exhibit Displays, AND the many different sizes and shapes of the banner skins, allows you to create unique displays for each event.
The graphic skins on these tabletop exhibit displays attach via buttons, so you can swap them out in seconds - this combination of great features makes these kits one of the best table top exhibit displays available in the marketplace today.
The Micro G frames ship with the graphics pre-installed, read for immediate use. The tabletop exhibit displays set up in seconds, and the strong magnetic connectors snap the frame into place, with no tool or show services labor support needed.